Quad Command
 |
Yamaha YFZ450 Velocity Intake System Standard Filter SizeYamaha YFZ450 Velocity Intake System Standard Filter Size This race designed intake kit makes big power gains over the stock airbox!!! Why? The factory intake tube is too small and not smooth bent, it restricts the intake flow and causes turbulence with the intake charge before reaching the carb. This intake kit replaces the factory airbox and is good for 3-5hp with a moderatly modified YFZ. The Velocity Intake is a smooth bent, basically straight shot right to the YFZ\'s carb. Intake maintains the 2 1/8 intake diameter before the flare at the filter mount increases to 2 1/4. Replaces factory airbox with a mandrel bent and ultra-light aluminum intake tube, increases intake velocity for max power in dry conditions. Comes with K&N RU-0620 with water repellent Outerwears 20-1010-01 You will feel the power increase when you completely un-restrict your YFZ\'s carburetor, requires an increase in main jet size but its well work the work if you want to go fast! This intake is only for dry riding conditions, and is perfect for drag racing and absolute dune ripping. Shaves off 2.7 lbs. from stock airbox, this intake with filter and hardware is only 1.1 lbs vs stock 3.8 lbs. Intake tube starts with a 6061 T6 aluminum tubing (2 1/8 diameter) and is mandrel bent 45 degrees with a flare at the last inch for the air filter to mount. A welded bracket bolts to the left airbox mounting pad, can be polished to a mirror finish. No clearance problems with suspension travel, engineered for additional clearance with most aftermarket rear shocks. Art.-Nr.: VELI-YFZ-1 159,00 EUR incl. 19 % USt zzgl. Versandkosten
Derzeit nicht lieferbar |
 |
Yamaha YFM 700R Velocity Intake System largeYamaha YFM 700R Velocity Intake System Large Filter Kit Same performance with 700cc‘s, this ones for the big cc quads and seriously tough looks! Replaces factory airbox with a mandrel bent and ultra-light aluminum intake tube. 2 in. to 2 1/2 in. Velocity Stack reducer at throttle body. Intended for use primarily in dry riding conditions, water repelant Outerwears and K&N filter included! Increases intake velocity for max power at high RPM‘s with a noticable increase in bottom end torque. Why? The stock airbox can impair airflow at high RPM while at low RPM the stock intake snorkel can collapse when you jump on the throttle with 700cc‘s. For that reason this intake really kicks up the throttle response and power at low-mid RPM. You will feel the mid-high RPM power increase when you completely un-restrict your 700‘s throttle body, works best with full performance exhaust system! This intake is intended only for dry to moderately wet riding conditions, and is perfect for TT/moto‘s/drag racing/absolute dune ripping. Shaves off 2.8 lbs. from stock aribox this intake with filter and hardware is only 1.3 lbs vs. stock 4.1 lbs. Pictured with optional K&N crankcase breather. Comes with K&N RU-4860 with water repellent Outerwears 20-1552-01 Intake tube starts with a mandrel bent 6061 T6 aluminum tubing; a welded bracket bolts with a stock mounting bolt. A provision on that bracket mounts the air inlet temp sensor (attached to the intake snorkel in stock form). Polished finish can be hand rubbed to a mirror shine. 700R Velocity Intake Features Aluminum Intake (2.8 lbs lighter than stock airbox) K&N High Performance air filter Outerwears water repellent Pre-Filter Heavy Silicon Velocity Stack intake reducer Polished finish. Art.-Nr.: VELI-700R-1L 209,00 EUR incl. 19 % USt zzgl. Versandkosten
Sofort versandfähig, ausreichende Stückzahl |
 |
Yamaha YFZ450 Velocity Intake System Large Filter SizeYFZ450 Velocity Intake System Large Filter Size This race designed intake kit makes big power gains over the stock airbox!!! Why? The factory intake tube is too small and not smooth bent, it restricts the intake flow and causes turbulence with the intake charge before reaching the carb. This intake kit replaces the factory airbox and is good for 3-5hp with a moderatly modified YFZ. The Velocity Intake is a smooth bent, basically straight shot right to the YFZ's carb. Intake maintains the 2 1/8 intake diameter before the flare at the filter mount increases to 2 1/4. Replaces factory airbox with a mandrel bent and ultra-light aluminum intake tube, increases intake velocity for max power in dry conditions. Comes with K&N RU-0640 with water repellent Outerwears 20-1090-01. This intake and filter combo will make the same power as large filter kit but can go longer between cleanings. Good for those long dusty endurance races. You will feel the power increase when you completely un-restrict your YFZ's carburetor, requires an increase in main jet size but its well work the work if you want to go fast! This intake is only for dry riding conditions, and is perfect for drag racing and absolute dune ripping. Shaves off 2.7 lbs. from stock airbox, this intake with filter and hardware is only 1.1 lbs vs stock 3.8 lbs. Intake tube starts with a 6061 T6 aluminum tubing (2 1/8 diameter) and is mandrel bent 45 degrees with a flare at the last inch for the air filter to mount. A welded bracket bolts to the left airbox mounting pad, can be polished to a mirror finish. No clearance problems with suspension travel, engineered for additional clearance with most aftermarket rear shocks. No additional fabrication necessary, this is a simple bolt on unit!!! Velocity Intake Features Aluminum Intake (2.7 lbs lighter than stock airbox) K&N air filter and Outerwears pre-filter Heavy rubber intake seal with all hardware Polished Finish Art.-Nr.: VELI-YFZ-1L 165,00 EUR incl. 19 % USt zzgl. Versandkosten
Derzeit nicht lieferbar |
 |
Yamaha YFZ450 Velocity Intake System Race Kit 2.5 Inch with Large FilterYFZ450 Velocity Intake System Race Kit 2.5 Inch with Large Filter More power with max-modifications: big cc's, ported heads, etc. This race designed intake makes big 5-15% power gains over the stock airbox!!! Why? The factory intake tube is too small and not smooth bent, it restricts the intake flow and causes turbulence with the intake charge before reaching the carb. The Velocity Intake is a smooth bent, basically straight shot right to the YFZ's carb. This Race Intake features a 2 1/8 - 2 1/2 inch reducer at the carb into the larger 2.5 inch diameter aluminum tube. Compare to the standard intake that measures 2 1/8 - 2 1/4 . Replaces factory airbox with a mandrel bent and ultra-light aluminum intake tube, increases intake velocity for max power in dry conditions. You will feel the power increase when you completely un-restrict your YFZ's carburetor, requires an increase in main jet size but its well work the work if you want to go fast! Comes with K&N RA-0610 with water repellent Outerwears 20-1090-01 This race intake is intended for dry riding conditions, and shaves off 2.6 lbs. from stock airbox. This intake with filter and hardware is only 1.2 lbs vs stock 3.8 lbs. Intake tube starts with a T6 6061 aluminum tubing (2 1/2 diameter) and is mandrel bent 45 degrees with a flare at the last inch for the air filter mount. A welded bracket bolts to the left airbox mounting pad, now with a polished finish. No clearance problems with suspension travel, engineered for additional clearance with most aftermarket rear shocks. No additional fabrication necessary, this is a simple bolt on unit!!! Velocity Intake Features Aluminum Intake (2.6 lbs lighter than stock airbox) K&N air filter and pre-filter Heavy rubber intake seal with all hardware Polished finish Jetting Recommendations Included Art.-Nr.: VELI-YFZ-2R 189,00 EUR incl. 19 % USt zzgl. Versandkosten
Derzeit nicht lieferbar |
 |
Suzuki LTR450 Velocity Intake SystemSuzuki LTR450 Velocity Intake System All Model Years Replaces factory airbox with a mandrel bent and ultra-light aluminum intake tube. Velocity Stack 2 inch – 2.5 inch at throttle body. Intended for use in dry riding conditions. K&N filter included! Increases intake velocity for max power at high RPM's with a noticable increase in bottom end torque. Why? The stock airbox can impair airflow at high RPM while at low RPM the stock intake snorkel can collapse when you jump on the throttle. For that reason this intake really kicks up the throttle response and power at low-mid RPM. You will feel the power increase when you completely un-restrict your R450's throttle body, the open intake lets the motor rev freely to the rev limiter. Works best with full performance exhaust system! Comes with K&N RA-0610 with water repellent Outerwears 20-1090-01 This intake is intended only for dry to moderately wet riding conditions, and is perfect for moto's/drag racing/absolute dune ripping. Shaves off 2.2 lbs. from stock aribox this intake with filter and hardware is only 1.2 lbs vs stock 3.4 lbs. Intake tube starts with a mandrel bent 6061 T6 aluminum tubing; a welded bracket bolts to the right airbox mounting pad. An additional bracket at the left mounts the air inlet temp sensor (found inside the airbox). Polished finish can be hand rubbed to a mirror shine. No additional fabrication necessary, this is a simple bolt on unit!!! R450 Velocity Intake Features Aluminum Intake (2.2 lbs lighter than stock airbox) K&N air filter and Outerwears pre-filter Heavy silicon Velocity Stack intake reducer Hardware and all mounting provisions Polished Finish Art.-Nr.: VELI-LTR450-1 159,00 EUR incl. 19 % USt zzgl. Versandkosten
Derzeit nicht lieferbar |
 |
Yamaha YFZ450R EFI Velocity Intake SystemYamaha YFZ450R EFI Velocity Intake System 2009-2010 fuel injected models Kit Includes: Aluminum Intake, K&N Filter, Outerwears Pre-Filter Rubber Snorkel and all hardware. This race designed intake makes big 5-15% power gains over the stock airbox!!! Why? The factory intake tube is too small and not smooth bent, it restricts the intake flow and causes turbulence with the intake charge before reaching the throttle body. Replaces your factory airbox with a mandrel bent and ultra-light aluminum intake tube. Intended for use in dry riding conditions. K&N filter included! Increases intake velocity for max power at high RPM's with a noticable increase in bottom end torque. Why? The stock airbox can impair airflow at high RPM while at low RPM the stock intake snorkel can collapse when you jump on the throttle. For that reason this intake really kicks up the throttle response and power at low-mid RPM. Comes with K&N performance filter RU-0640 & Water Repellent Outerwears 20-1090-01 This race intake is intended for dry riding conditions, and shaves off 2.6 lbs. from stock airbox. This intake with filter and hardware is only 1.2 lbs vs stock 3.8 lbs. Intake tube starts with a mandrel bent 6061 T6 aluminum tubing; a welded bracket bolts to the left cross bracket mounting pad. The air inlet temp sensor mounts in stock fashion to the top of the new aluminum intake via a welded bracket. Includes a bracket that will mount your stock crankcase vent box (attached at the side of airbox in stock form) use with optional K&N crancase breather 62-1330. No additional fabrication necessary, this is a simple bolt on unit!!! YFZ450R Velocity Intake Features Aluminum Intake (2.6 lbs lighter than stock airbox) K&N Performance air filter Outerwears Black Pre-Filter Heavy rubber intake coupler Hardware and all mounting provisions Polished Finish Art.-Nr.: VELI-YFZREFI-1 189,00 EUR incl. 19 % USt zzgl. Versandkosten
Derzeit nicht lieferbar |
 |
Raptor YFM 660R Velocity Intake System 2001-2005Yamaha YFM 660R Velocity Intake System 2001-2005 Art.-Nr.: VELI-660R 179,00 EUR incl. 19 % USt zzgl. Versandkosten
Derzeit nicht lieferbar |
Seiten: 1 / 1
